Originally Posted by kevinmalec

Nice job! Well done.
My buddy bought a vinyl magentic blackout panel and it came with several scuff marks. When he washed it , for the first time, with soap and water, it had weird water marks on it. Within a week, the corner started to peel up! Needless to say, he took it off and ask for his money back. I saw it in person and it is not worth the $29 he spent on it.

Originally Posted by JBD3482

Thank you for the comments. For the tail lights I used the vinyl tint kit from the Anchor Room. Up close you can see a few bubbles on the left one. I took a spray bottle and put a few drops of dish soap in it along with water. Then I cleaned the lights and sprayed them with that mixture of soap and water. I then sprayed the back of the vinyl tint and put it on the light. After moving it around for a while I finally got it lined up. Then I sprayed the outside of the vinyl tint with the soap and used a felt covered squeegee to push the bubbles and water out. Next I used a hair dryer to make the tint stick a little better. Then I put the MMD tail light surrounds on.

I was thinking about doing something with the spoiler. Never thought about the bottom of it. That's a great idea!

Originally Posted by cariacou

like this:
http://0.tqn.com/d/mustangs/1/0/x/2/0/-/230.jpg

IMO it's the best spoiler look you can get on a 2011+ mustang

Originally Posted by cariacou

like this:
http://0.tqn.com/d/mustangs/1/0/x/2/0/-/230.jpg

IMO it's the best spoiler look you can get on a 2011+ mustang

Originally Posted by BleedinBlue

That black underside that comes factory on the CS cars is actually a plastic piece, not just paint or vinyl. I was surprised by it. It'd be worth a little time with plasti-dip to try to re-create though, I love the look. (Although you can't tell on a black car, lol)

OP, I'm honestly surprised, I like it.