CDC Shaker hood system 4.6
#1
CDC Shaker hood system 4.6
I'm looking for picture of the back and underside of the hood scoop and air box , Can anyone help me out? I'm going to modify one to work with an Edelbrock SuperCharger. Any help would be grate.
I have an extra hood to use for fab work so, I'm not worried about filling extra hole or anything.
I have an extra hood to use for fab work so, I'm not worried about filling extra hole or anything.
Last edited by slickman; 06-05-2013 at 09:35 PM.
#3
#5
I did end up powder coating the valve covers at a later date as well.
The bottom of the SHaker attached to the front top 2 studs of the throttle body in the front & with a 'ball' stud in the rear (Bolted onto the existing factory intake manifold)
#6
Thanks for the pics! I have a friend thats giving me a hood to use so i can leave mine stock. I can get the shaker hood setup for $500. Paint will cost me $500. So just looking at the process of making it work with a edelbrock super charger.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-24-2015 09:18 PM