Need Your Input; Amp and Sub Mounting
#11
If you can, have a custom box made to fit in the space behind that tail light. Shouldn't cost more than $75-80. I made my own in a few hours and it cost me $12. You'll be amazed at how much space you can free up doing so.
If you're not too concerned about the fold down seats, you can mount carpeted MDF across the trunk behind the seats. That's where I mounted my amps. You can cut the MDF to fit just the amp and still allow use of a pass-through trunk.
If you want pics to give you an idea, I'll be happy to post them.
If you're not too concerned about the fold down seats, you can mount carpeted MDF across the trunk behind the seats. That's where I mounted my amps. You can cut the MDF to fit just the amp and still allow use of a pass-through trunk.
If you want pics to give you an idea, I'll be happy to post them.
#12
#13
Sorry it took so long! Here's the way I did mine.
If you have any questions about any of it, just PM me. Not sure how much difference in space there is for the year models where the box is but I hope it gives you some ideas!
If you have any questions about any of it, just PM me. Not sure how much difference in space there is for the year models where the box is but I hope it gives you some ideas!
Last edited by Ricardo; 08-08-2013 at 12:43 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM