2014 Shelby GT500 SVTPP Wheels on 2014 V6 Premium Performance Package
 

I own a 2014 V6 Premium Performance Package.
I am upgrading my stock 19'' 255/40R19 wheels to 19x9.5" 265/40ZR19 (front), and 20x9.5" 285/35ZR20 (rear) wheels. These are OEM specs for 2013-2014 Shelby GT500 SVTPP.

Would this upgrade require any specific mods, or can be easily swapped (since my wheels are already 19x8.5'')?
Not sure if this would specifically require steering rack limiters as well?

Experts!

Should be fine to just swap them out i think with no issues. You may need to transfer over the tps sensors or reprogram the TPS sensors if you arent transferring.

If you arent lowered you probably wont need an adjustable panhard bar, although it couldnt hurt.

just change the wheels and call it a day. nothing needs to be done, it's the same car.

Awesome!

Haha well I wouldn't go that far haha. But as she said, nothing else should be required

your speed will be off, but you likely know that already

Speedo shouldn't be off enough to matter.

Man, I was nervous about putting the Brembo Package wheels (19x9) off a GT on my 14 V6 Mustang Convertible. Wasn't sure going from my 18x8's to 19x9's all around.

You are going all out with 19x9.5 and 20x9.5 wheels! Whoa.
Should look good.

Thanks all for the confirmation. I'll update this thread with pics once the car is updated (hopefully in next couple of days).

got the new wheels fitted this weekend, look sick!
speedo is accurate, nothings changed with gt500 wheels, speed validated with digital speed check.