ModBargains.com | '13 5.0 Build Thread - KWV3/Forgestar/Hotchkis/Falken/CDC/RTR/&More
#11
Little bit more progress today it seems. Should be almost finished by now, ready for some color:
More updates to come, but likely after the color is all taken care of, with a photoshoot once it's all done!
More updates to come, but likely after the color is all taken care of, with a photoshoot once it's all done!
#13
I'll leave the wheels on it for now, they're already 20x10 and 20x11 with 275/315s so they've got some decent meat on them. I will be getting new wheels in the near future, I just have to get them built first
#15
Few more photos of it basically complete. Rear needs to be put on and then we should be all good for some color:
YES, the mesh grill that's silver now, will be black. That's basically all I'm going to change aside from the color, I know a few guys messaged me about changing them to black, don't worry, it'll be done
YES, the mesh grill that's silver now, will be black. That's basically all I'm going to change aside from the color, I know a few guys messaged me about changing them to black, don't worry, it'll be done
#18
50mm per corner, 100mm in total which equates to about 4" wider in total. It allows for a 20x12.5 with a low offset on 345 tires, so we're up in the Corvette/Viper range for fitment
#19
Dropped it off last week at Impressive Wrap in El Monte to get the color done. I've finally narrowed down the finishes, and will make a final selection tonight. Here's a picture from Saturday when they put it up on jack stands getting ready for work: