whiteline trans mount insert
05-01-2014, 12:56 PM
#1
Thread Starter
Join Date: Mar 2012
Location: Louisiana
Posts: 15
whiteline trans mount insert
Since day 1 my car has had some occasional grinding into 5th gear. As long as I am very careful with my 5th gear shifts i can usually avoid the grind. Has anyone installed the whiteline transmission mount insert and had it fix this problem. From what I have read the 4th to 5th gear grind is a pretty common problem. My car is a 2012 gt with the 6 speed manual getrag.
Thanks!
Thanks!
05-03-2014, 12:03 PM
#4
Thread Starter
Join Date: Mar 2012
Location: Louisiana
Posts: 15
05-05-2014, 06:57 PM
#6
1st Gear Member
Join Date: May 2013
Location: GA
Posts: 58
It is tollerable...I only hear (not feel) it if I'm at a stop light with the clutch pedal released. When I first installed the NVH was too much for me. I cut the middle section out and basiclly all I have in are the two side pieces. I would say it kept 85-90% of the benefit of the bushing and added 5-10% NVH. I honestly don't hear it much anymore unless the radio is low.
05-06-2014, 10:56 AM
#7
Thread Starter
Join Date: Mar 2012
Location: Louisiana
Posts: 15
It is tollerable...I only hear (not feel) it if I'm at a stop light with the clutch pedal released. When I first installed the NVH was too much for me. I cut the middle section out and basiclly all I have in are the two side pieces. I would say it kept 85-90% of the benefit of the bushing and added 5-10% NVH. I honestly don't hear it much anymore unless the radio is low.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM