moosestang

help me out here, what the F does this go to? I found this plug just under the low side refrigeration lines near the master cylinder. It looks factory and I sure don't remember putting it there anyway. I can't remember removing anything that it plugged into. It's coming out of the same wire bundle as the purge solenoid thingy. I was looking for refrigeration leaks when i noticed it. it's to short to reach anything.

I probably asked this same question several years ago and just forgot.

gmoran1469

Here's what mine plugs into:



Different color on the plug but the same plug, just two wires going to it.

moosestang

yeah, i have a plug on that. the wires are a different color too. This extra connector comes out of the same wiring bundle as that connector in your pic.

Maybe something for an automatic? Anyone with a manual 06 have this extra connector? I can't remember removing anything during the whipple install that had an eletrical connector.

gmoran1469

Only other plug off that cluster goes to the side of my brake fluid res.

moosestang

Damn! That's what it is. I must have disconnected it when i installed the linelocks and forgot it. It didn't set a code. What is the purpose, to warn you when the fluid is low? Weird!

I even looked around the master cylinder and didn't see the connector.

gmoran1469

Maybe a temp sensor for overheating? Those are the only two things that I can think of. Low fluid or temp.