Rear Window Defogger
#11
I just used the Frost Fighter kit on Saturday. I also used a new tab that I got from them. Very easy to do, just clean the window, tape off a square around where the original tab attached, sand the square lightly, apply the epoxy in the square and to the tab, and put the tab on. I did the heat cure which is leave it alone for 10 minutes and then heat it with a hair dryer on high for another 20 min. Today was the first real chance to test it and it works great.
Thread
Thread Starter
Forum
Replies
Last Post
DreadPirateRoberts
V6 (1994-2004) Mustangs
4
09-26-2015 02:11 PM
wishinsky
2010-current S197 Appearance Section
1
09-21-2015 09:48 AM
tj@steeda
Steeda Autosports
0
09-16-2015 07:53 PM