door panel removal
#2
RE: door panel removal
First you have to remove all of the 9mm screws around the edge of the door, then you have to remove the little plastic insert behind the handle that you use to open the door I believe it is a torx 25 bit and then you have to remove the panel behind the handle you use to close the door and again with the torx bit. Then I would remove the plastic corner piece where the mirror is and then you just have to pull up the panel. You will then need a pair of needlenose pliers to remove the cable from the door latch, then diconnect all of the quick connects.
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
General Tech
0
09-25-2015 06:58 PM