Where to buy...
#1
Where to buy...
Im looking for a 5.0 badge for my 2012 GT.... I want the 5 and the 0 to be black and the dot to be red... cant find them on AM, can some one help me out and send me a link ASAP.
#2
#5
It's easy. They are just held on by 3M tape or a tape like residue. Heat them, peel them off, clean the surface thoroughly, then wipe with alcohol, spray a little adhesion promoter on there (not much, just a little) and slap that bad boy into position.
#6
Most of the outer emblems are applied with double sided 3m tape. A thin plastic edge works well to get under them. A body filler spreader OR a vinyl squeegee work well. A last resort is some heat from a blow dryer. Usually, with the newer emblems, heat is not necessary.
#7
be aware, when prying off the original emblem, its held on by 3m tape .. but it is also stabbed into the fender. you will have to use a little force to get the center to give out. I suggest flossing through both sides to the center until it gets stuck, then pop it off.
#8
Definitely gotta get it from both sides of the center prong.