First mods: 2011 GT with CS front, SVT rear, blackout, FRPP P springs, Saleen grille
05-30-2012, 02:47 PM
#1
3rd Gear Member
Thread Starter
Join Date: Jan 2008
Location: Arizona
Posts: 598
First mods: 2011 GT with CS front, SVT rear, blackout, FRPP P springs, Saleen grille
Hey all. Couldn't leave well enough alone. Made a few orders with LMR, and picked up GT500 exhaust, rear lower facia, front facia with fogs, Saleen grille, and I used a flatblack vinyl kit to do my blackout in the back. Turned out great I think. Just waiting for my grille emblem to finish it off...
Its also lowered on FRPP P springs, which I love since it's lowered but can still clear curbs up front.
Its also lowered on FRPP P springs, which I love since it's lowered but can still clear curbs up front.
05-30-2012, 03:31 PM
#4
MF Administrator
Join Date: May 2005
Location: South Carolina
Posts: 8,191
05-30-2012, 05:24 PM
#6
3rd Gear Member
Thread Starter
Join Date: Jan 2008
Location: Arizona
Posts: 598
I'm in the same boat with ya. If I go straight back, the very lower underside lip (not the front of the bumper facia) will barely scrape. If I go slow at an angle, it doesn't. Also, the ride quality is great. Tight, but comfortable if that makes sense. I had these springs on my 07 as well and loved them then too.
05-30-2012, 05:26 PM
#7
3rd Gear Member
Thread Starter
Join Date: Jan 2008
Location: Arizona
Posts: 598
05-31-2012, 01:40 AM
#8
1st Gear Member
Join Date: Feb 2012
Location: Kansas
Posts: 127
