Nitrous set up help
01-16-2018, 07:49 PM
#1
Thread Starter
Join Date: Jan 2018
Location: nevada
Posts: 2
Nitrous set up help
hey guys I am new here but I have been fitting a second wet nitrous kit to my 2017 v6. I need help with a few issues:
1. Once I connected to the fuel line I can constantly watch my distance to empty count down but I checked for leaks and the cylinoid is closed and there are no leaks. It seems weird it would be doing this.
2. I can not get a clear tach signal from the third coil pack on the drivers side for my window switch.
3. Where is the tps (throttle positioning wire) that I need to tap into for the wide open throttle switch?
1. Once I connected to the fuel line I can constantly watch my distance to empty count down but I checked for leaks and the cylinoid is closed and there are no leaks. It seems weird it would be doing this.
2. I can not get a clear tach signal from the third coil pack on the drivers side for my window switch.
3. Where is the tps (throttle positioning wire) that I need to tap into for the wide open throttle switch?
01-24-2018, 04:49 AM
#2
Thread Starter
Join Date: Jan 2018
Location: nevada
Posts: 2
Found the issue
hey guys I am new here but I have been fitting a second wet nitrous kit to my 2017 v6. I need help with a few issues:
1. Once I connected to the fuel line I can constantly watch my distance to empty count down but I checked for leaks and the cylinoid is closed and there are no leaks. It seems weird it would be doing this.
2. I can not get a clear tach signal from the third coil pack on the drivers side for my window switch.
3. Where is the tps (throttle positioning wire) that I need to tap into for the wide open throttle switch?
1. Once I connected to the fuel line I can constantly watch my distance to empty count down but I checked for leaks and the cylinoid is closed and there are no leaks. It seems weird it would be doing this.
2. I can not get a clear tach signal from the third coil pack on the drivers side for my window switch.
3. Where is the tps (throttle positioning wire) that I need to tap into for the wide open throttle switch?
The tps wire you need for a WOT switch is the yellow and purple wire on the TPS also you can not just tap a rpm window switch into the 6th coil pack you must purchase a tach adapter and install that to the coils
Thread
Thread Starter
Forum
Replies
Last Post
1999GT
Archive - Trades & Freebies
5
10-06-2008 12:05 AM