Notices
3.7L V6 Technical Discussions Any questions about the new engine, transmission, exhaust, tuners/CAI, or gearing can be asked here!

2014 V6 Vert Rattle sound

Thread Tools
 
Search this Thread
 
Old 03-24-2018, 11:24 PM
  #1  
edvfd911
Thread Starter
 
edvfd911's Avatar
 
Join Date: Mar 2018
Location: Mississippi
Posts: 4
Default 2014 V6 Vert Rattle sound

Hi all, I have a 2014 V6 Convertible, it has a rattle sound which sounds like it's coming from the front end. It kind of sounds like what rubber tipped metal would sound like if it was bouncing against other rubber tipped metal. Especially going over speed bumps or down bad roads or gravel roads. It sounds like a bad strut or something, however... I've taken it in to the dealer twice now, the mechanics have taken it for a test drive and have heard the same thing, both times they push and pull, twist and turn everything they can with the suspension and front end, and nothing is loose, nothing is wore down, all the bushing are good, the second time they took me to the car when it was on the lift and went over the majority of the parts they checked to ensure to me that nothing is loose or worn. So my question is, has anyone else had this issue with a ghost rattle/knocking from the front end and if you have, what resolved the issue? Thanks!
edvfd911 is offline  
Old 06-28-2018, 11:24 AM
  #2  
artsvettes73
2nd Gear Member
 
artsvettes73's Avatar
 
Join Date: Oct 2011
Location: NJ
Posts: 193
Default

I chased this down on my 07 Mustang wasted money on a lot of parts,and still had the "clunk" Turns out it was the front stabilizer bushings. I don't know if Ford is calling out the wrong bushings or it's just **** poor engineering. I felt the bushing gave some resistance when installing them but not enough for my liking. Put them on and still had the noise. So I made two shims 2x2x3/16 HDPE plastic. Loosen the sway bar and slide the shim behind the swaybar bushings and torque them down. Now go out for a drive and look for bumps. I feel if these bushing were made of rubber instead of poly the sound may have been absorbed. But I'm just a 68 yo wrench head. I am embarressed to say how long I have put up with this clunk
artsvettes73 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Big Al's 03
4.6L General Discussion
2
08-02-2015 11:55 AM
302Travis
4.6L (1996-2004 Modular) Mustang
4
11-10-2014 11:56 AM
veloccity
GT S197 General Discussion
5
09-23-2014 10:31 PM
iMuf
S197 Handling Section
4
03-08-2014 06:11 PM
redm0nsteR
4.6L (1996-2004 Modular) Mustang
4
09-04-2007 03:34 AM



Quick Reply: 2014 V6 Vert Rattle sound



All times are GMT -5. The time now is 11:10 PM.