anyone happen to know?
03-14-2007, 01:12 AM
I ♥ Acer
Thread Starter
Join Date: Aug 2006
Location: Saskatoon, SK, Canada
Posts: 4,921
anyone happen to know?
anyone know the stock cam duration and lift on a 351 Windsor?
03-14-2007, 01:30 AM
4th Gear Member
Join Date: Feb 2006
Location: South Jersey
Posts: 1,250
RE: anyone happen to know?
i cant help you with that, but it would help people trying to answer you if you told them what the engine is coming out of
03-14-2007, 01:33 AM
I ♥ Acer
Thread Starter
Join Date: Aug 2006
Location: Saskatoon, SK, Canada
Posts: 4,921
RE: anyone happen to know?
thats just the thing i dont have any clue what it came out of, all i know is its a 1972 engine
03-14-2007, 01:14 PM
3rd Gear Member
Join Date: Oct 2005
Location:
Posts: 722
RE: anyone happen to know?
Im not sure but i bought a brand new cam with lifters for 80 dollars from summit. Its not an insane cam but it does bring out some hp while adding torque.
03-14-2007, 04:21 PM
1st Gear Member
Join Date: Apr 2006
Location:
Posts: 138
RE: anyone happen to know?
256 deg Intake @ .004"
270 deg Exhaust @ .004"
.425" Intake Valve Lift
.450" Exhaust Valve Lift
Correct me if I'm wrong...
Indy
03-14-2007, 08:08 PM
I ♥ Acer
Thread Starter
Join Date: Aug 2006
Location: Saskatoon, SK, Canada
Posts: 4,921
RE: anyone happen to know?
^ that will help thanks, because i im going to be getting a new cam soon b/c their pretty cheap in all and i was wondering what i had now to see how bigger i should go....but no too much so i drop a valve lol
03-14-2007, 08:09 PM
5th Gear Member
Join Date: Oct 2006
Location: west chester
Posts: 3,305
RE: anyone happen to know?
what type of camu tryin to get?
and are u gonna do the roller conversion?
03-14-2007, 08:30 PM
I ♥ Acer
Thread Starter
Join Date: Aug 2006
Location: Saskatoon, SK, Canada
Posts: 4,921
RE: anyone happen to know?
Quote:
ORIGINAL: ih8chevy
what type of camu tryin to get?
and are u gonna do the roller conversion?
dunno yet on the cam i'll have to call some people,
and i am not doing the rolloer conversion.
03-15-2007, 03:41 AM
5th Gear Member
Join Date: Dec 2005
Location: DFW
Posts: 3,806
RE: anyone happen to know?
i wouldnt go much higher then a 5inch lift and 300 degrees
03-15-2007, 01:49 PM
I ♥ Acer
Thread Starter
Join Date: Aug 2006
Location: Saskatoon, SK, Canada
Posts: 4,921
RE: anyone happen to know?
i was thinkin around a .520 lift with some good flowing heads