thinking of doing the 351 swap, had a few ?'s
#1
thinking of doing the 351 swap, had a few ?'s
okay, im looking at putting this motor in my mustang, its an 89 mustang 5.0HO with a t5.
http://www.fordracingparts.com/parts...tKeyField=9281
its the 351w sportsman block,
i still want to run efi and was wondering if i used an intake spacer if it would clear those valve covers... (or if efi valve covers would clear the rockers and everything if the answers no)
i also wanted to know if anyone knew if the reverse rotation water pump that comes with the motor will fit the timming cover that is on the motor,
and lastly, would the stock fuel pump and fuel rails keep up with the more cubes and power, i know the injectors would have to be upped (30's?) as well as the maf... i currently have a typhoon upper and lower so i'll prolly keep the upper and buy a new lower to match.
Thanks in advance, hope to start getting ready to do this in the summer and start buying parts asap.
http://www.fordracingparts.com/parts...tKeyField=9281
its the 351w sportsman block,
i still want to run efi and was wondering if i used an intake spacer if it would clear those valve covers... (or if efi valve covers would clear the rockers and everything if the answers no)
i also wanted to know if anyone knew if the reverse rotation water pump that comes with the motor will fit the timming cover that is on the motor,
and lastly, would the stock fuel pump and fuel rails keep up with the more cubes and power, i know the injectors would have to be upped (30's?) as well as the maf... i currently have a typhoon upper and lower so i'll prolly keep the upper and buy a new lower to match.
Thanks in advance, hope to start getting ready to do this in the summer and start buying parts asap.
Thread
Thread Starter
Forum
Replies
Last Post
Mustangs of Illinois
Classic Mustangs (Tech)
4
08-22-2015 10:00 PM