mudvayne1

Ok, I've seen the swap lists on here and on other sites. I am just going to get the bare essentials so I can get this motor in my car. I'm not worried about building a street beast I just want a mildly built street car.

Heres what I know that I need to get. Let me know if these are right and what else I'll need. Thanks.

I've got a 94 351w out of a pickup with less than 5K miles on rebuild. It's going in my 95 5.0

-oilpan
-shorty block hugger headers
-intake/carb
-mech. fuel pump
-157 tooth 28 oz. flywheel (will my bellhousing from the 5.0 to the t-5 work on the 351 to the t-5?)
-motor mounts

What else is absolutely necessary to do the swap? I know about clearance issues but I already have an aftermarket cowl hood on the stang.

John Doev1

http://www.svtcobraltd.com/351Swap.html