351 Distributor
#4
I run an MSD Pro Billet, I believe the part number may be similar to the one you typed above. I'll verify tomorrow AM, and get back to you. One thing you NEED to know is that the gears on the distributor will vary weather you have a Roller or a Flat Tappet 351W.
With that said, what year 351W is it?
I'm not sure what material roller/ flat tappet cams call for but I know 100% that they ARE different. If you look at the sticky's you will see a post from VRIStang. I believe that he goes into some detail about what you will need.
With that said, what year 351W is it?
I'm not sure what material roller/ flat tappet cams call for but I know 100% that they ARE different. If you look at the sticky's you will see a post from VRIStang. I believe that he goes into some detail about what you will need.
#7
I run an MSD Pro Billet, I believe the part number may be similar to the one you typed above. I'll verify tomorrow AM, and get back to you. One thing you NEED to know is that the gears on the distributor will vary weather you have a Roller or a Flat Tappet 351W.
With that said, what year 351W is it?
I'm not sure what material roller/ flat tappet cams call for but I know 100% that they ARE different. If you look at the sticky's you will see a post from VRIStang. I believe that he goes into some detail about what you will need.
With that said, what year 351W is it?
I'm not sure what material roller/ flat tappet cams call for but I know 100% that they ARE different. If you look at the sticky's you will see a post from VRIStang. I believe that he goes into some detail about what you will need.
#8
There is one on ebay for $98 made in china of course. Not sure of the quality, but just wanted to throw it out there. It's for an efi setup, says 94 and up but I'm sure it will fit older engines converted over. I would like to know if anyone is using one?
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM
jaiidutch
Motor Swap Section
2
09-14-2015 10:29 AM