351w with procharger or vortech
#1
351w with procharger or vortech
I know the name says cobra i do own a 01 cobra but recently found the light side picked up a 89 gt and started to shed some more weight on it. anyways enough about that im swapping to a 351w but wanted some opinions on procharger or vortech? maybe some info on a turbo. the car will be used as a street/drag car. its not a daily driver, just looking for some fun and would like to see 11's. all advice is welcome remember these are opinions im not looking for people to flame other people just give me the facts thanks guys.
#5
3.73 to 4.10 gears, 5 spd, 351w with TFS Fast as cast 190 cc heads and a vic jr with a 750 HP style carb and 1 and 3/4" long tubes with 3 inch exhaust. Lunati vodoo series flat hydraulic camshaft with peak power @ 6000 to 6400 RPM and you will be in the 11's.
Joe
Joe
#6
beast im looking forward to working on it. This car is starting from scratch at the moment im fixing up the interior almost done next step is the suspension. ill take pics and keep you all posted on the progress. 351w swap will be after that. Thank you all for the info.
#7
R.barns old setup:
476hp at 6,100 rpm and 433 trq at 5,400 on the engine dyno
370rwhp w/ TrickFlow EFI intake and installed in car with full accessories.
357W - true roller cam block .03 over.
AFR 185's with 10:1 c/r
CompCams XFI roller cam (.579/.579 236/248)
Vic Jr intake
750 carb
long tube headers
windage tray
33* total timing.
Don't ever remember any times from him but it has plenty of power to be able to do so.
476hp at 6,100 rpm and 433 trq at 5,400 on the engine dyno
370rwhp w/ TrickFlow EFI intake and installed in car with full accessories.
357W - true roller cam block .03 over.
AFR 185's with 10:1 c/r
CompCams XFI roller cam (.579/.579 236/248)
Vic Jr intake
750 carb
long tube headers
windage tray
33* total timing.
Don't ever remember any times from him but it has plenty of power to be able to do so.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-16-2015 07:53 PM