what i have, what i need, advise and help please
#1
what i have, what i need, advise and help please
hey,
working on a 351 based build for my hatch, just looking for some information,
What I Have So Far
351 based short block, dished pistons, forged internals, 4 bolt splayed block, 383 cubic inches
Canton pan, hd oil pump, unknown cam (still waiting on info), not a 94+ block.
Brodix CNC m2 Track 1 heads, i was told they are 68cc heads (motor made 9:1 with 58cc heads)
longtube heads, new hood, blah blah (unimportant stuff right now)
Motor is going to be boosted, either a centrifugal blower or a turbo system if i can find a 351 kit for a good price...
was looking for suggestions on intake, injector size, and tb size. will be a street driven car for the most part, maybe some track driving. manual car, full interior so say 3500 pounds, 3.55 rear.
Also, anyone have any experience with Quarterhorse tuning from Moates especially on a boosted car?
Thanks for any and all
NA
working on a 351 based build for my hatch, just looking for some information,
What I Have So Far
351 based short block, dished pistons, forged internals, 4 bolt splayed block, 383 cubic inches
Canton pan, hd oil pump, unknown cam (still waiting on info), not a 94+ block.
Brodix CNC m2 Track 1 heads, i was told they are 68cc heads (motor made 9:1 with 58cc heads)
longtube heads, new hood, blah blah (unimportant stuff right now)
Motor is going to be boosted, either a centrifugal blower or a turbo system if i can find a 351 kit for a good price...
was looking for suggestions on intake, injector size, and tb size. will be a street driven car for the most part, maybe some track driving. manual car, full interior so say 3500 pounds, 3.55 rear.
Also, anyone have any experience with Quarterhorse tuning from Moates especially on a boosted car?
Thanks for any and all
NA
#2
I may be goin with the GT500 MAF & ECU swap. My buddy did it on his 347 R blocked procharged coupe and he has no drivability issues whatsoever and has like 4 different tunes. Hes layin down 510hp/590 ftlbs daily driven on pump gas. I gotta 357 with stock internals (planning rebuild to 408) and a paxton vr4. Not installin the blower till I do the 500 stuff. I'd suggest that. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
DrunknRuckus
4.6L (1996-2004 Modular) Mustang
5
08-23-2015 10:05 AM