K Member Compatibility
 

I'm working on a 351 swap into my mustang and I had a question about the k member compatibility. I know a 94 or 95 GT will work but will the k member out of a fox body work in my 2000 for mounting the 351W?

yep 45

Yes, but only if the rear mounting holes are slotted like on our UPR K-member. There is about a 1/2" difference in the location of those holes from the fox to the SN95 bodies.

See how ours are slotted (the bolt holes farthest away from you in this pic)

http://www.uprproducts.com/mustang-p...member-79.html

ok so i can get a fox k member and just open up the rear mounting holes a little bit and it will fit right? that makes it a little bit easier. i also plan on getting a MSD 6200 to run the engine, what's a good distributor type to use? and would anyone have a used one they would be selling?

I was always under the impression that the fox body K-member will not bolt into the New Edge and that the 94-95 was the only K-member that was compatible. Outside of using the 94-95 I was told there is a company that makes K-members specifically for the pushrod > New Edge swap.

Our 79-95 k-member can be used in a 96-04 car, but it has motor mount pads for a pushrod motor. So like you're saying, you can use the UPR Products 79-95 k-member to put a 302 or 351 in a New Edge car.

Not to thread hijack - but UPRSHARAD can you pm me - I have a question about identifying a UPR KMember I bought - bought it from a guy who said its for a 5.0 in fox/94,95 5.0

Something makes me wonder...the motor mount locations are strange.

pics of mine...what mounts are those?

http://img412.imageshack.us/img412/8104/kmem.jpg

Uploaded with ImageShack.us

That looks like it might be our old style 79-95 5.0 k-member. You can call the shop at 561.588.6630 and discuss it with them if you want to be sure.

how is the fitment with your guys K members...Im swapping a 351w in my 88 fox and decided since the motor is gonna be out to go ahead and swap in the new front end