414 build.....
#1
414 build.....
I'm currently going from my 347 to a 414cuin Windsor. I have as follows 71w block Afr205 heads trick flow cam edelbrock victor intake 42lb inj c&l 76mm induction to a 75mm tb 1.7 RR dart 4bm caps eagle rods and 4in crank aeromotive e700 pump 10 supply from pump to reg 8 from reg to rails 6 return. I'm usi g the bbk 1 3/4 in ceramic longtubes thru xpipe with dynomax ultras. Still running the 3.55s went from Aod to c4 have moated 1/4 horse setup. I'm running a 22cc dish to tailor the compression to a hair under 11:1. Pump gas motor here with my NX Gemini kit using custom PTC nitrous converter aluminum driveshaft. About 60% done swapping to upr coilovers and km ember on the suspension. Will post results on the dyno when I'm done....hopefully before this year is out.
#5
I still have to build my c4 I'm using all PA components using the upgraded drum,servo and roller planet.... money has just been slow lol. Wanted to go up to a 432 but funds just weren't there the heads were not a fun buy either lol but its my first set of fully CNC heads wow.... worth the money to look at them. But layer when I have time I'll try to post some pics.
#6
I can only imagine what those cost. I just resprung my TF 190s and used them for this build. They flow good and I plan to make up for the lack of cubes with a healthy shot of N2o. What kind of power are you looking at for that motor?
#7
Shooting for around 500 na. I also have my NX kit for the extra I don't make.
The only thing I'm iffy about is the tb but I have talked to many different sources and actually had it flowed on a sf600 it flows 830 cfm in our atmosphere here so maybe its good to go.
The only thing I'm iffy about is the tb but I have talked to many different sources and actually had it flowed on a sf600 it flows 830 cfm in our atmosphere here so maybe its good to go.
Last edited by Venomantidote95; 06-03-2014 at 12:27 PM.
#8
Shooting for around 500 na. I also have my NX kit for the extra I don't make.
The only thing I'm iffy about is the tb but I have talked to many different sources and actually had it flowed on a sf600 it flows 830 cfm in our atmosphere here so maybe its good to go.
The only thing I'm iffy about is the tb but I have talked to many different sources and actually had it flowed on a sf600 it flows 830 cfm in our atmosphere here so maybe its good to go.
Thread
Thread Starter
Forum
Replies
Last Post