engine swap 302 to 351
#1
engine swap 302 to 351
i have a 88 302 that im going to swap a 351w into i know i will need a oil pan n pick up. could the intake off of the 302 work on the 351w fuel injection manifold
work.how about the dist. also what would be a good cam??? with 351 bore 030. stock heads maybe something different, would like to get about 425 hp/ 450 trq.
going to run 410 gears
work.how about the dist. also what would be a good cam??? with 351 bore 030. stock heads maybe something different, would like to get about 425 hp/ 450 trq.
going to run 410 gears
#6
Foghorn Leghorn
Join Date: Dec 2006
Location: I reside in a near constant state of amazment.
Posts: 2,923
#7
no way youre getting 425hp with stock heads...
personally id get a 94+ f150/e150 351w motor they are setup for roller cams. as for the oil pan if i remember correctly the crown vic 351w oil pan will work. probably the dizzy too if you can find one that came with the sefi injection(but i dunno what year they stopped using the 351w in the vics?)
personally id get a 94+ f150/e150 351w motor they are setup for roller cams. as for the oil pan if i remember correctly the crown vic 351w oil pan will work. probably the dizzy too if you can find one that came with the sefi injection(but i dunno what year they stopped using the 351w in the vics?)
Thread
Thread Starter
Forum
Replies
Last Post
YoungStangsMan
5.0L (1979-1995) Mustang
15
09-05-2015 07:01 PM
Mustangs of Illinois
Classic Mustangs (Tech)
4
08-22-2015 10:00 PM