bronxbomba63

Ok, this may be a stupid question, so please excuse it. But I'll be going dual soon, buying a system off a member of another forum. It's set up for long tubes, which I plan on getting. The question I have is, should I get a muffler shop to extend the sensors, or is that something that can be done in my garage. Also, I haven't had a chance to look under my ride, so I forget if there is only one sensor on the passenger side, or if both driver and passenger sides have sensors. Any input is appreciated. Thnx
Here's a link to the pic of the cats to give everybody an idea:http://cabuzzi.dyndns.org/website/te...t/DSC02479.JPG

BWfVA

From the pics it looks like it should bolt right up to factory manifolds or shortys

08REDHEADGT

i just did my o/r x-pipes and both o2s are on the passenger side and one is on the drivers side, the 2nd o2 is on the manifold for the drivers side

bronxbomba63

So basically, it should be the same for the v6? So all I need to get is a set of extenders for the sensors?

onederful100

yea you can get O2 sensor extension wires.