Temp gauge not moving from cold...

Reply Subscribe

Thread Tools

Search this Thread

02-20-2019, 04:51 AM

#11

08'MustangDude

Banned

Join Date: Jan 2018

Location: Pennsylvania

Posts: 2,327

Mine was a bad gauge. You would get an engine under temperature code if the coolant
was too cold when driving. Also, if it blows heat, then it's not the T-stat. You can buy
gauge replacement kits on eBay. You can buy a cluster, then you devalue the car if you
do not get the mileage put into the replacement, but it would be a good time to upgrade
to the 6-gauge cluster, with the readout. You need the three button module too, but people
are selling them cheap enough on eBay. Might be able to get a MyColor cluster too...

02-28-2019, 07:54 PM

#12

Hotgirl

Join Date: Feb 2019

Location: CA

Posts: 4

THANK YOU!!! I’m so happy you replied. You are the only one who has ever posted the same exact problem and you hadn’t been on here in so long, I thought this was a long shot. I searched and searched. This really threw my engine shop since my wires once had a break and were reconnected multiple times. I will replace the cluster. Thank you so much for replying to me. 😁😘

03-01-2019, 05:25 AM

#13

Gravydog316

2nd Gear Member

Join Date: Jan 2017

Location: SK

Posts: 467

Quote:

Originally Posted by Hotgirl

I know this is super old, but what was the problem? I have the same EXACT issue and no one can figure it out. Gauge stuck on cold. Kill the engine and restart and it’s risen. I really hope you’ll reply. You are the only person on the Internet I can find who’s had this same exact issue.

(i'm sure they are all long gone)
try asking on www.MustangEvolution.com &/or www.TheMustangSource.com
those are pretty active;
search Google for other forums & try searching/asking in them
:-)