factory clutch starting to slip in 4th @75mph.
06-20-2014, 08:06 PM
#1
Thread Starter
Join Date: Mar 2006
Location: NC, charlotte
Posts: 15
factory clutch starting to slip in 4th @75mph.
It's been awhile since have on the forum.
I have a 2005 4.0 with the dc harder with 295 rwhp! Still have factory clutch , buts it's starting to slip at acceleration 70-75 mph in 4th and 5th when passing or going down on ramp.
My question: Recommendations for a good street clutch that will hold the Hp, but not sticky enough to tear up tranny .
I have a 2005 4.0 with the dc harder with 295 rwhp! Still have factory clutch , buts it's starting to slip at acceleration 70-75 mph in 4th and 5th when passing or going down on ramp.
My question: Recommendations for a good street clutch that will hold the Hp, but not sticky enough to tear up tranny .
09-22-2014, 04:03 PM
#3
2nd Gear Member
Join Date: May 2012
Location: IL
Posts: 200
Hi Nick,
How's the pedal effort compared to stock on the Centerforce?
I am doing an engine project on my car and will be going with 75-100 HP Zex on the new motor. Was tryting to decide between Spec stage 2 and Centerforce...
Can't find much info on pedal effort.
Thanks,
Tom
How's the pedal effort compared to stock on the Centerforce?
I am doing an engine project on my car and will be going with 75-100 HP Zex on the new motor. Was tryting to decide between Spec stage 2 and Centerforce...
Can't find much info on pedal effort.
Thanks,
Tom
Thread
Thread Starter
Forum
Replies
Last Post