Notices
4.0L V6 Technical Discussions Any questions about engine, transmission, exhaust, tuners/CAI, or gearing can be asked here!

Harmonic Balancer separated, once I replaced it a loud tapping noise started

Old 04-23-2018, 01:12 PM
  #1  
subaru123
Thread Starter
 
subaru123's Avatar
 
Join Date: Apr 2018
Location: Illinois
Posts: 2
Default Harmonic Balancer separated, once I replaced it a loud tapping noise started

For some reason I didn't notice that my harmonic balancer had separated. The only reason I found this to be the problem is because the belt was loose, found the pulley sitting on my subframe. Once I replaced the harmonic balancer and started the car, there was a really loud tapping noise coming from the top of the motor. Sounds like a baseball card in bike spokes. I've had people tell me it could be a lifter or my timing chain but until this broke on my car, i didn't have much knowledge of the harmonic balancer. Could the separation cause catastrophic engine damage? I believe this has to be where the noise came from, but the noise only started once the repair was complete. Any suggestions?
subaru123 is offline  
Old 04-23-2018, 01:14 PM
  #2  
subaru123
Thread Starter
 
subaru123's Avatar
 
Join Date: Apr 2018
Location: Illinois
Posts: 2
Default

Tapping noise is heard at idle, haven't tried to drive it because I was afraid to lol.
subaru123 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
brynnanfox
V6 (1994-2004) Mustangs
10
11-07-2014 08:06 AM
brynnanfox
V6 (1994-2004) Mustangs
0
04-24-2012 09:44 PM
Nel86
4.6L (1996-2004 Modular) Mustang
7
11-08-2011 09:36 PM
QuarterMileMaster
General Tech
6
11-01-2007 04:27 PM
Timmay!!!
2005-2014 Mustangs
26
10-17-2007 03:11 PM


Thread Tools
Search this Thread
Quick Reply: Harmonic Balancer separated, once I replaced it a loud tapping noise started



All times are GMT -5. The time now is 07:55 PM.