Getting dynoed today. what numbers should I expect?
03-10-2006, 06:10 AM
#1
Thread Starter
Join Date: Feb 2006
Posts: 10
Getting dynoed today. what numbers should I expect?
I have a 2000 GT with the following performance mods:
Steeda cold air kit
Accufab 70mm tb/matching intake plenum
Underdrive pullies
long tube headers/matching h-pipe
Bora catback
X-Cal 2 tune with 93 octane
I was thinking maybe 290 to the wheels? Thanks.
Steeda cold air kit
Accufab 70mm tb/matching intake plenum
Underdrive pullies
long tube headers/matching h-pipe
Bora catback
X-Cal 2 tune with 93 octane
I was thinking maybe 290 to the wheels? Thanks.
03-10-2006, 11:03 AM
#3
6th Gear Member
Join Date: Jan 2004
Location: United States
Posts: 12,575
RE: Getting dynoed today. what numbers should I expect?
ORIGINAL: sandcracker21
are u a manual or auto?
my gues would be 235 stock + 5 for cai + 10 for tb/p + 5 for UDP + 20 for exhaust + 5 for tune
= 280 rwhp
are u a manual or auto?
my gues would be 235 stock + 5 for cai + 10 for tb/p + 5 for UDP + 20 for exhaust + 5 for tune
= 280 rwhp
I would guess between 250 and 260 RWHP with a 5 speed, no higher.
03-10-2006, 11:43 AM
#6
4th Gear Member
Join Date: Nov 2005
Location: Michigan
Posts: 1,235
RE: Getting dynoed today. what numbers should I expect?
ORIGINAL: 2000GT4.6
For reference with what is in my mods list I put down 280 RWHP on the dynojet.
I would guess between 250 and 260 RWHP with a 5 speed, no higher.
ORIGINAL: sandcracker21
are u a manual or auto?
my gues would be 235 stock + 5 for cai + 10 for tb/p + 5 for UDP + 20 for exhaust + 5 for tune
= 280 rwhp
are u a manual or auto?
my gues would be 235 stock + 5 for cai + 10 for tb/p + 5 for UDP + 20 for exhaust + 5 for tune
= 280 rwhp
I would guess between 250 and 260 RWHP with a 5 speed, no higher.
+1... I seen a guy w/ an 01 GT w/ more stuff than that only throwing down 254...[:@]
03-10-2006, 01:36 PM
#8
4th Gear Member
Join Date: Apr 2005
Location: West Virginia
Posts: 1,463
RE: Getting dynoed today. what numbers should I expect?
ORIGINAL: 2000GT4.6
For reference with what is in my mods list I put down 280 RWHP on the dynojet.
I would guess between 250 and 260 RWHP with a 5 speed, no higher.
ORIGINAL: sandcracker21
are u a manual or auto?
my gues would be 235 stock + 5 for cai + 10 for tb/p + 5 for UDP + 20 for exhaust + 5 for tune
= 280 rwhp
are u a manual or auto?
my gues would be 235 stock + 5 for cai + 10 for tb/p + 5 for UDP + 20 for exhaust + 5 for tune
= 280 rwhp
I would guess between 250 and 260 RWHP with a 5 speed, no higher.
If that were so, after exhaust and gears, everyone's next bolt on would be cams.
03-10-2006, 01:38 PM
#9
4th Gear Member
Join Date: Sep 2004
Location: Roanoke, VA
Posts: 1,681
RE: Getting dynoed today. what numbers should I expect?
I'd say 275-280 range....
I got Bassani headers, Bassani X w/ high flow cats, Bassani Cat-backs, and C&L CAI and i put 291/311...but considering you started with less power than i did (no offense) id say 280ish
I got Bassani headers, Bassani X w/ high flow cats, Bassani Cat-backs, and C&L CAI and i put 291/311...but considering you started with less power than i did (no offense) id say 280ish
