Vortech SC + Strut tower brace ?
04-14-2006, 11:43 AM
#1
4th Gear Member
Thread Starter
Join Date: Jan 2005
Location: Oklahoma City, Oklahoma
Posts: 1,519
Vortech SC + Strut tower brace ?
To all that have a Vortech SC will a strut tower brace from BBK still fit/clear the SC? I woul like to get a strut tower brace but am also planning on getting a Vortech in the future and don't want to waste money on a brace if it will not owrk when I get the SC.
04-14-2006, 11:51 AM
#2
5th Gear Member
Join Date: Jan 2006
Location: Orange County, California
Posts: 2,375
RE: Vortech SC + Strut tower brace ?
I dont have one but I could not see how it would effect it in the least bit. The SC mounts toward the front of the engine, the only thing the strut brace would be going over is some tubing which is no higher then CAI tubing or anything of that sort. Dont take my word for it but I'm 99.99% sure it would not be effected at all.
04-14-2006, 02:33 PM
#6
4th Gear Member
Thread Starter
Join Date: Jan 2005
Location: Oklahoma City, Oklahoma
Posts: 1,519
RE: Vortech SC + Strut tower brace ?
Thanks mustang_montana, that is the answer I was looking for.
I know that the strut tower brace is no where near the SC head unit itself, I needed to know if it interfeared with the pipeing from the SC head unit to the TB.
I know that the strut tower brace is no where near the SC head unit itself, I needed to know if it interfeared with the pipeing from the SC head unit to the TB.
04-14-2006, 05:28 PM
#7
5th Gear Member
Join Date: Jan 2006
Location: Orange County, California
Posts: 2,375
RE: Vortech SC + Strut tower brace ?
ORIGINAL: DIVER8374
Thanks mustang_montana, that is the answer I was looking for.
I know that the strut tower brace is no where near the SC head unit itself, I needed to know if it interfeared with the pipeing from the SC head unit to the TB.
Thanks mustang_montana, that is the answer I was looking for.
I know that the strut tower brace is no where near the SC head unit itself, I needed to know if it interfeared with the pipeing from the SC head unit to the TB.
04-14-2006, 05:34 PM
#8
4th Gear Member
Thread Starter
Join Date: Jan 2005
Location: Oklahoma City, Oklahoma
Posts: 1,519
RE: Vortech SC + Strut tower brace ?
ORIGINAL: SOHCtimes2
There's no way that would be possible, the piping doesnt sit any higher then the piping for any cold air. And I was just trying to help, sorry I don't have a vortech...but It was still an educated assumption. I have seen many vortech mustangs with strut braces....
ORIGINAL: DIVER8374
Thanks mustang_montana, that is the answer I was looking for.
I know that the strut tower brace is no where near the SC head unit itself, I needed to know if it interfeared with the pipeing from the SC head unit to the TB.
Thanks mustang_montana, that is the answer I was looking for.
I know that the strut tower brace is no where near the SC head unit itself, I needed to know if it interfeared with the pipeing from the SC head unit to the TB.
My last responce was not directed towards you SOHCtimes I know that you were trying to help and I too saaumed that the pipe woud not be any higher that a CAI just wanted to be sure. So thanks for the help [sm=smiley20.gif]. I was just trying to clearify to MASTER that I know where the head unit is located for the S/C.
04-14-2006, 10:47 PM
#9
5th Gear Member
Join Date: Jan 2006
Location: Orange County, California
Posts: 2,375
RE: Vortech SC + Strut tower brace ?
ORIGINAL: DIVER8374
My last responce was not directed towards you SOHCtimes I know that you were trying to help and I too saaumed that the pipe woud not be any higher that a CAI just wanted to be sure. So thanks for the help [sm=smiley20.gif]. I was just trying to clearify to MASTER that I know where the head unit is located for the S/C.
ORIGINAL: SOHCtimes2
There's no way that would be possible, the piping doesnt sit any higher then the piping for any cold air. And I was just trying to help, sorry I don't have a vortech...but It was still an educated assumption. I have seen many vortech mustangs with strut braces....
ORIGINAL: DIVER8374
Thanks mustang_montana, that is the answer I was looking for.
I know that the strut tower brace is no where near the SC head unit itself, I needed to know if it interfeared with the pipeing from the SC head unit to the TB.
Thanks mustang_montana, that is the answer I was looking for.
I know that the strut tower brace is no where near the SC head unit itself, I needed to know if it interfeared with the pipeing from the SC head unit to the TB.
My last responce was not directed towards you SOHCtimes I know that you were trying to help and I too saaumed that the pipe woud not be any higher that a CAI just wanted to be sure. So thanks for the help [sm=smiley20.gif]. I was just trying to clearify to MASTER that I know where the head unit is located for the S/C.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-16-2015 07:53 PM
tj@steeda
Steeda Autosports
0
09-01-2015 08:16 PM
