HP & Torque Equation
#21
RE: HP & Torque Equation
ok... so what you are telling me is that you don't agree with the math... because
TQ RPM HP
(50 x 3500)/5252 = 33.3
TQ RPM HP
(100x3500)/5252 = 66.6
TQ RPM HP
(150x3500)/5252 = 99.9
as I was saying at 3500 RPMs a 50 ft/lb increase in TQ will give you 33 HP increase.
so whatever your TQ is at 3500 multiply it by .666 and that is your HP at 3500 RPMs... THAT is a fact... pull any dyno sheet do the math and look for yourself... I'll even pull some from the internet and post
TQ RPM HP
(50 x 3500)/5252 = 33.3
TQ RPM HP
(100x3500)/5252 = 66.6
TQ RPM HP
(150x3500)/5252 = 99.9
as I was saying at 3500 RPMs a 50 ft/lb increase in TQ will give you 33 HP increase.
so whatever your TQ is at 3500 multiply it by .666 and that is your HP at 3500 RPMs... THAT is a fact... pull any dyno sheet do the math and look for yourself... I'll even pull some from the internet and post
Thread
Thread Starter
Forum
Replies
Last Post
LivingInThePast
Classic Mustangs (Tech)
2
09-16-2015 12:20 PM