2valves/cylender to a 4 valve?
#5
RE: 2valves/cylender to a 4 valve?
Your better off goin with a 2v pi head. Take your heads off and bring them to a local machine shop.
Have them port and polish and d a 3-angle valve job. Tell them no more than .040 on the valves.( they'll know what your sayin)
Put in a medium cam and valve springs, this will run you about $1500 with all gaskets and parts and labor
Heads....$5-600
Cams....$500
Valve springs...$100
Lifters....$100
PI intake(lower).$200
This will give you around 50-60hp with an exhaust.
Have them port and polish and d a 3-angle valve job. Tell them no more than .040 on the valves.( they'll know what your sayin)
Put in a medium cam and valve springs, this will run you about $1500 with all gaskets and parts and labor
Heads....$5-600
Cams....$500
Valve springs...$100
Lifters....$100
PI intake(lower).$200
This will give you around 50-60hp with an exhaust.
Thread
Thread Starter
Forum
Replies
Last Post