Professional Products Typhoon
#32
RE: Professional Products Typhoon
ORIGINAL: Aixtreme89
What?!!!? You have installed other bolt ons without torquing the bolts and nuts to specs? Thats just crazy talk... No offense, but thats stupid. I dont need to explain the reasons... But it took me about 14 hours to install the valve springs and cams. The springs were a pain in the ***, some of the valve springs like near the master cylinder are very difficult to get out! I dont know, all the bolt ons I put on only gave me marginal increase in power. I should have skipped it all and went forced induction, it owuld have been cheaper. But no, I am impaitent, so I had to get things one at a time...
ORIGINAL: blueherd02gt
how hard is it to change cams (with that tool) just wondering oh and how long did it take. I've done everything short of heads and cams + plus this would be the oppertunity to buy a torque wrench
how hard is it to change cams (with that tool) just wondering oh and how long did it take. I've done everything short of heads and cams + plus this would be the oppertunity to buy a torque wrench
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
5.0L GT S550 Tech
7
10-07-2015 04:01 AM
Boostaddict
Lethal Performance
0
10-01-2015 08:58 AM
Boostaddict
3.7L V6 S550 Tech 2015 - 2017
0
10-01-2015 08:57 AM