1/4 mile ets
06-05-2006, 10:30 PM
#1
1st Gear Member
Thread Starter
Join Date: Jun 2006
Location:
Posts: 64
1/4 mile ets
i just had some 3.73s installed i can feel the diff. but i can see it on my slips. my best time was a 14.50@95.77 with a 2.2 60 ft. with the 73s i pulled off a 14.410@96.00 with a 2.111 60 foot. i am running a 04 gt 5 speed with some big nasty 19' wheels 245/35zr19 to be exact. they weigh a ton i also asked around to see how others were doing and got negitive responces due to weather. i mean am i ' granny shifting, not double clutching like i should' wtf this was my second time to the track BAYTOWN TEXAS. right at sea level. i did cut a 2.0 60 foot on one pass but thank god i missed second. lol im hoping with a set of welds and good weather i can cut a 13.90. i would be so happy and thats reasonable for that setup. input needed
06-05-2006, 10:34 PM
#2
6th Gear Member
Join Date: Jan 2004
Location: United States
Posts: 12,575
RE: 1/4 mile ets
ORIGINAL: 40th04
i just had some 3.73s installed i can feel the diff. but i can see it on my slips. my best time was a 14.50@95.77 with a 2.2 60 ft. with the 73s i pulled off a 14.410@96.00 with a 2.111 60 foot. i am running a 04 gt 5 speed with some big nasty 19' wheels 245/35zr19 to be exact. they weigh a ton i also asked around to see how others were doing and got negitive responces due to weather. i mean am i ' granny shifting, not double clutching like i should' wtf this was my second time to the track BAYTOWN TEXAS. right at sea level. i did cut a 2.0 60 foot on one pass but thank god i missed second. lol im hoping with a set of welds and good weather i can cut a 13.90. i would be so happy and thats reasonable for that setup. input needed
i just had some 3.73s installed i can feel the diff. but i can see it on my slips. my best time was a 14.50@95.77 with a 2.2 60 ft. with the 73s i pulled off a 14.410@96.00 with a 2.111 60 foot. i am running a 04 gt 5 speed with some big nasty 19' wheels 245/35zr19 to be exact. they weigh a ton i also asked around to see how others were doing and got negitive responces due to weather. i mean am i ' granny shifting, not double clutching like i should' wtf this was my second time to the track BAYTOWN TEXAS. right at sea level. i did cut a 2.0 60 foot on one pass but thank god i missed second. lol im hoping with a set of welds and good weather i can cut a 13.90. i would be so happy and thats reasonable for that setup. input needed
