Clutch issues continue...What do i need to solve!?!?
#1
Clutch issues continue...What do i need to solve!?!?
Ok, so i went back to the shop and the guy was going to adjust the cable and of course, like i told him before, there is no way to adjust. SOOOOO, what do i need so that as i raise the pedal off the floor, the clutch will engage sooner than it is? I have no clue as to what the clutch qudrant does and understand how the adjustable cable works, but i think i need both of these in order to do it. Am i correct in my conclusion? Thanks!
#3
RE: Clutch issues continue...What do i need to solve!?!?
I don't get the question...
what year do you have?
Clutch quadrant merely takes the slack out of your stretched cable or helps to reduce the amount of travel of the pedal as your clutch wears out....
what year do you have?
Clutch quadrant merely takes the slack out of your stretched cable or helps to reduce the amount of travel of the pedal as your clutch wears out....
#4
RE: Clutch issues continue...What do i need to solve!?!?
I want the clutch to catch sooner as i let the pedal out...right now i let the clutch out nearly all the way and then it finally catches....I want it to catch closer to the middle of the pedal travel...thanks
#5
RE: Clutch issues continue...What do i need to solve!?!?
The only way I can think you can accomplish that is by moving the point on the clutch pedal assembly where the cable attaches, further away from the fulcrum (pivot point)
Thread
Thread Starter
Forum
Replies
Last Post
AmericanMuscle4.6GT
2005-2014 Mustangs
7
11-10-2015 02:06 PM
ccdguy
5.0L (1979-1995) Mustang
1
09-19-2015 05:20 PM