karmstrong_2

Hey guys I know this isn't the right forum but no one is biting in the audio section....I just need to know how to connect the RCA cables when a four channel amp is bridged. I'm connecting two subs to a four channel amp so it has to be bridged to get the right ohms and I'm just not sure how to connect the RCA's to make sure each sub gets sound...thanks a lot guys

Cornbread01

you will need to get splitters for the rca's so that all for channels get power and then bridge each speaker to two of the channels like so first speaker(channel 1+ channel2 -) sencond speaker (channel3 + channel4 -) hope this helps

99gtstang

go to radio shack they have y cables and you can get femal/male connectors if needed