Dragstrip/Launching tips
#1
Dragstrip/Launching tips
my first time @ the strip last week i ran a 14.7 @ 98.99, that was spinning first and second, this week im goign up w/ drag radials, what rpms should i try launching at and such for the best time cauz im lost and dont wanna waste runs when i could already know a good rpm range
ne tips would be appreciated
thanx
ne tips would be appreciated
thanx
#5
RE: Dragstrip/Launching tips
ORIGINAL: MustangGT99
yea wont i blow my rearend when i launch that high it seems a bit much , i have to drive the car home you know
yea wont i blow my rearend when i launch that high it seems a bit much , i have to drive the car home you know
#7
RE: Dragstrip/Launching tips
Yea man I just ran my first at the track with a 14.2 @ 97.24 I cant hook for ****. I'm heading back out there with some Nitto 555R's soon as possible. Ive seen guys with DR's launch anywhere from 3k-4500 with stock axle and had no problems.
#8
RE: Dragstrip/Launching tips
ORIGINAL: wes ley n the G T
Yea man I just ran my first at the track with a 14.2 @ 97.24 I cant hook for ****. I'm heading back out there with some Nitto 555R's soon as possible. Ive seen guys with DR's launch anywhere from 3k-4500 with stock axle and had no problems.
Yea man I just ran my first at the track with a 14.2 @ 97.24 I cant hook for ****. I'm heading back out there with some Nitto 555R's soon as possible. Ive seen guys with DR's launch anywhere from 3k-4500 with stock axle and had no problems.
#9
RE: Dragstrip/Launching tips
Yea I mean it happens I know it does, but from what I've been experiencing personally, the stock axle should be good unless you have really badass tires like full slicks or somethin. Simple drag radials like the DOT-approved Nitto 555R's, as one kid had on his stang last night, hook great and didnt mess with his axle a bit. Also obviously you'll **** the axle if you have serious power, but with just bolt-ons and nothing serious, you should be good.