P.I. Conversion
a P.I. conversion is taking parts from a 99-04 and puting them on a 95-98 correct? if so..... what parts need to be swapped to complete the P.I. swap?
|
RE: P.I. Conversion
first off it is for a 96-98 and you need the 99-04 heads cams intake and gaskets. i think you need a heater hose too
|
RE: P.I. Conversion
if i do that, what power increase am i looking at?
|
RE: P.I. Conversion
somewhere around 40rwhp i think
|
RE: P.I. Conversion
If your going to do a PI swap get ported heads and more agressive cams this way you can make some serious hp.
|
RE: P.I. Conversion
don't get stock 99-04 heads either get some good perf. ones.
|
RE: P.I. Conversion
getting stock heads is fine, if you p&p them and get some nice cams you'll make some really good HP. Im planning on doing the swap and more then likley with just stock heads since im low on cash and i need to fix my burning oil problem.
|
RE: P.I. Conversion
with the pi swap, ull be a hare faster than a stock 99-04. by the time u do that, just might as well have gotten some aftermarket heads and cams, and gotten more power out of em
|
RE: P.I. Conversion
approx. how mush extra power?
|
RE: P.I. Conversion
ORIGINAL: Jefferson approx. how mush extra power? |
All times are GMT -5. The time now is 10:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands