easy instal - MustangForums.com

4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

easy instal

Reply

 
 
 
Old 08-31-2006, 10:11 PM
  #1  
Jskeezy84
2nd Gear Member
Thread Starter
 
Join Date: Jun 2006
Location:
Posts: 353
Default easy instal

im waiting on my tokico hp shocks, pro kit springs, and sway bars for my 04 gt and was wondering how easy is it to install the sway bars?? Ive never touched them on my other cars and wasnt sure. Also with a 1 1/2 inch drop do i have to cut my bump stops down??
Jskeezy84 is offline  
Reply With Quote
Old 08-31-2006, 11:08 PM
  #2  
97BlackStang
3rd Gear Member
 
Join Date: Jun 2005
Location:
Posts: 618
Default RE: easy instal

Sway bars are pie. If you have air. Theres four bolts hodling the front one to the frame. Then you have to remove the endlinks, W/O air that could take awhile becuase there is alot of threads to back off. Then the sway bar will come right out. The brake caliper bolts will be a bear without an impact also, along with the top strut nut. As far as your bump stop in the rear end yes, you will need a new one, or your springs may come with one, My old H&Rs did. Good luck though man.
97BlackStang is offline  
Reply With Quote
Reply
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BOBCATJACK
New Member Area
3
09-14-2015 02:18 AM
JimC
Off Topic
22
09-11-2015 08:00 PM
mtgldr
S197 Handling Section
1
09-10-2015 09:43 PM

Forum Jump

Thread Tools
Search this Thread
Advertising
Featured Sponsors
Vendor Directory