4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

I cant figure it out!

Old 09-18-2006, 12:00 AM
  #1  
Robbie02GT
1st Gear Member
Thread Starter
 
Robbie02GT's Avatar
 
Join Date: Sep 2006
Location:
Posts: 83
Default I cant figure it out!

Can any one help me i have a 2001 gt with full exhaust, cold air intake,75 mm t/b, 90mm mass air, kennie bell no intercooler 10.5 pounds,#36 injectors, twin svt focus pumps, sct 2 tune. The car has 4 dead cylinders on passenger side but the plugs are new and the coils checked out i also still have 26-47 pounds at injectors. it idles fine but as soon as you give it gas it spits and sputters and also i did a compression and leak down test and that checks out aswell. Someone told me it could be spun cam bearing or blower intake gasket is shot. I also had some coolant speal on my motor from heater return line split. It is in the shop now and it has stomped everyone there. Any help would be greatly appreciated!
Robbie02GT is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CS2007
General Tech
8
06-25-2019 09:45 PM
jerrytubes
2005-2014 Mustangs
2
10-23-2015 12:11 PM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
BeatnikFink
New Member Area
6
10-01-2015 08:00 PM
guitarman376
4.6L (1996-2004 Modular) Mustang
0
09-30-2015 05:54 PM


Thread Tools
Search this Thread
Quick Reply: I cant figure it out!



All times are GMT -5. The time now is 01:21 PM.