4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

3650 grinds 1st gear

Thread Tools
 
Search this Thread
 
Old 12-14-2011, 09:08 PM
  #1  
CobraMaverick
Thread Starter
 
CobraMaverick's Avatar
 
Join Date: Dec 2011
Location: Virginia
Posts: 1
Default 3650 grinds 1st gear

So, I have a 2001 4.6 Dohc with the Tremec 3650 5spd trans in a 1972 Maverick Grabber

I have looked all over the Mustang forum boards for someone posting about my problem.... no luck. So I figure someone here will steer me in the right direction.

When coming up to a stop around 1 or 2 mph I can no longer get it into 1st gear without grinding it and forcing it in gear. This problem came on suddenly... no warning that something was starting to go bad.

So far all I have done is a fluid change which did nothing for my 1st gear problem but made the rest of the gears shift more smoothly.

One thing I did to try, is to to rule out a clutch problem. I roll forward about 5 mph then depress clutch pedal and shift into reverse.... well, it shifts smoothly into reverse. So I am thinking a Trans problem and not a clutch problem. I have a firm clutch pedal and it shifts smooth as silk into all gears except 1st
CobraMaverick is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
Bokeo
Street/Strip
6
10-10-2015 08:28 PM
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
uedlose
The Racers Bench
4
10-01-2015 08:31 PM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM



Quick Reply: 3650 grinds 1st gear



All times are GMT -5. The time now is 03:30 AM.