BBK Pulley Kits
are the bbk undrive pulley kits any good? does anyone know?
|
RE: BBK Pulley Kits
with underdrive pulleys you will get 5 -10 more horsepower to the wheels becuase they are lighter than stock pulleys. BBK is a good choice.
3.73 gear, flowmasters, o/r h-pipe, autologic chip, bbk underdrive pulleys, MAC CAI, upgraded clutch, B&M short throw shifter, Eibach sportline Springs |
RE: BBK Pulley Kits
do you have the aluminum ones?
|
RE: BBK Pulley Kits
ORIGINAL: TeflonDon do you have the aluminum ones? |
RE: BBK Pulley Kits
Go Steeda!!!!!!!!!!!!!!
|
RE: BBK Pulley Kits
ORIGINAL: 04BlueGT ORIGINAL: TeflonDon do you have the aluminum ones? What issue did you have with the MACs? |
RE: BBK Pulley Kits
Installed easily just like the instructions said. Everything lined up and seems just fine. For about a week.
After that, if I kept the car between 2500-2800 for more than a second, the car would misfire and throw codes for the 3rd and 5th cylinders. I took it to Ford and asked everyone I could about this problem. In the end, I figured out that the pulley was causing a vibration that the crank sensor was picking up and causing the misfires. I verified that everything was bolted correctly and to torque specs. Nothing worked. I installed Steeda pulleys and I've never had that problem return. Also, once you mate the aluminum pulley to the stock dampener, it's pretty much permanent. So, going back to stock is almost impossible without purchasing a new dampener. |
RE: BBK Pulley Kits
I have steeda and love em, no problems at all. What they do is slow down your accesorys and stuff to put more power to the wheels. Kinda like A/C on Vs A/C off. I felt a lil power gain and pleaseeee ignore all the bs you hear about your battery not charing and stuff...alll false.
|
RE: BBK Pulley Kits
thanks guys, i'll get the steeda one's then.
|
RE: BBK Pulley Kits
ill still prolly get the BBK ones :D
|
RE: BBK Pulley Kits
I normally dont have a problem with mac but their pullies SUCK ASS..... my gf's 94 5.0 had them on for only a few years and they were all rusted. the stock pulleys were all fine but the mac's were rusted to beat hell, and so rusted the water pump pulley was rubbing on the water pump and became out of round.... I bought her some bbk pullies and let me tell you they are QUALITY!! thicker and more durable, extremely nice powdercoating. bbk will not steer you wrong as long as they aren't piggyback
|
RE: BBK Pulley Kits
hey bigdog, those SLP LMII you got, how do they sound? I've got the frst LM i guess, they sounded ok, until i put the slp x-pipe on there, now it's just LOUD as crap. i'm gettting ready to either ditch the x-pipe or the cat-back, gotta see which one is making all that noise.
|
All times are GMT -5. The time now is 10:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands