Pulleys and Bearings
#1
Pulleys and Bearings
I have a 2003 4.6 stock GT. When my car is idle I notice what sounds like a bad set of bearings coming from the front of my engine and I'm certain it's from a pulley - I just can't tell which pulley it's coming from. I've read so far that the idler pulley is a common problem. Would this be accurate?
Also, I'm a Do-It-Yourselfer but with very limited car engine experience. I have a couple of questions:
I'm guessing the tensioner is what I would need to adjust to remove the serpentine belt. How do I remove the serpentine belt?
If I remvoe the belt, to replace a pulley, do I risk knocking anything out of timing?
Thanks in advance.
Also, I'm a Do-It-Yourselfer but with very limited car engine experience. I have a couple of questions:
I'm guessing the tensioner is what I would need to adjust to remove the serpentine belt. How do I remove the serpentine belt?
If I remvoe the belt, to replace a pulley, do I risk knocking anything out of timing?
Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
Golfsito
GT S197 General Discussion
9
10-06-2015 11:02 AM
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM