Good Gains????? What u think?
12-06-2006, 01:06 AM
#1
Thread Starter
Join Date: May 2005
Location:
Posts: 34
Good Gains????? What u think?
Just got my car dynoed and tuned yesterday! It's a 03 GT Mustang.
Here are the goodies:
BBK Long Tube Headers
BBK high flow H-Pipe
Flowmaster Force II Cat Back
K&N air filter
BBK 75mm Throttle Body
C&L Plenum
Diablosport Predator (custom tune by ELD)
FRPP 3.73 Gears
Dyno stats: 287rwhp and 339 torque
You guys think these are good numbers?
Before the custom tune and gears I ran a 13.7 in the 1/4 at 101mph. I only got 2 runs in so I don't know if I could have done better or not. And if you're curious, the numbers before the custon tune were: 278rwhp and 323torque. Can't wait to take it to the track next season to see what it'll run now......of course the track just closed for the year after the new mods damnit!!
Here are the goodies:
BBK Long Tube Headers
BBK high flow H-Pipe
Flowmaster Force II Cat Back
K&N air filter
BBK 75mm Throttle Body
C&L Plenum
Diablosport Predator (custom tune by ELD)
FRPP 3.73 Gears
Dyno stats: 287rwhp and 339 torque
You guys think these are good numbers?
Before the custom tune and gears I ran a 13.7 in the 1/4 at 101mph. I only got 2 runs in so I don't know if I could have done better or not. And if you're curious, the numbers before the custon tune were: 278rwhp and 323torque. Can't wait to take it to the track next season to see what it'll run now......of course the track just closed for the year after the new mods damnit!!
12-06-2006, 01:14 AM
#3
3rd Gear Member
Join Date: Nov 2006
Location:
Posts: 676
RE: Good Gains????? What u think?
when you take it to the track, take out your back seat, and spare, should free up about a 10th of a second
my car with early 01 motor, u/d pulleys, timing at 18* o/r x, and 4.10 grs ran a 13.2 , so you should see a good improvement
my car with early 01 motor, u/d pulleys, timing at 18* o/r x, and 4.10 grs ran a 13.2 , so you should see a good improvement
12-06-2006, 01:20 AM
#5
4th Gear Member
Join Date: Feb 2006
Location:
Posts: 1,947
RE: Good Gains????? What u think?
Yeah can we see the Dyno sheets? The horsepower seams kinda high with only bolt on mods. And the Torque is way to high. I have seen car with a lot more done with cams and heads make only 300 to 310 Rwph. So im not seeing how u got 287 with boltons.
Just ask 20004.6 or Code or Dan. They will tell you.
Just ask 20004.6 or Code or Dan. They will tell you.
12-06-2006, 01:26 AM
#6
Thread Starter
Join Date: May 2005
Location:
Posts: 34
RE: Good Gains????? What u think?
I do have the dyno sheet...not sure how to post it on here???
And in case I'm mistaken, I thought all dyno sheets posted the RWHP. Do they ever show the HP at the crank??? I have no reason to bull**** you guys....just curious if these numbers are good or not.
And in case I'm mistaken, I thought all dyno sheets posted the RWHP. Do they ever show the HP at the crank??? I have no reason to bull**** you guys....just curious if these numbers are good or not.
12-06-2006, 01:35 AM
#10
Thread Starter
Join Date: May 2005
Location:
Posts: 34
RE: Good Gains????? What u think?
ORIGINAL: nanaki
are those SAE numbers?
are those SAE numbers?
I have no idea what SAE means?? This is the first Dyno I've ever had done. I'm just reading the numbers off the dyno sheet. It shows the old HP and Torque as well as the New HP and Torque. Tells me when the curves peak........Not sure why you guys don't believe me....are these numbers really that high to be unbelievable???
