2000GT4.6

skip the tint and CAI and get some gears

Gears should be everyones first mod. Instanly puts you ahead of all the stock GT's out there.

GThopeful

Im gonna get my windows tinted 20%, a JLT RAI, and probably gears. Although, I have to find a good shop to put them in. Theres really no shops around me that specialize in Mustangs, so I have no idea where I'm gonna take it.

CobraSnake

I believe that i'm going to do a IRS brace, a shifter, CAI, pullies, and the tune. The CAI, pullies, and the tune i'm getting for myself and the rest is little stuff so my wifes parents are buying one and my parents are buying the other. I can't wait, because then in summer i'm going to get some nitrous maybe.

code3GT

I refuse to answer this thread on the grounds that the lovely mrscode will KILL me.

ZW99GT

Well im glad you asked.

I am buying a car for myself for Christmas. I was basically gonna find a nice 99-00 GT 5speed for 8-9k. So as an extra christmas bonus im buying a car with ALOT more. for a couple grade extra. So I guess for christmas im gonna get this stuff instead of a stock components.

5.1L stroker KIT w/
4340 Forged 3.75" stroke crank shaft
Manly H Beams
.030 Over Probe Forged Pistons with a 10.5 cc dish
Perfect Circle Ringsthat have been file fitted for nitrous.

Patriot Stage 3 heads
Comp cam w/ springs
typhoon Intake P&P to match heads
Full exhaust(with BBK LT o/r X and Magnaflow catback)
36lb injectors
GMS mass air
75mm TB
Sacs Clutch
Tuner
D/R's
A lovely NX plate kit with all the bells and whistles


After aquiring the car, I will have a rigorious dyno tune ASAP to set up the NX 200 wet shot. A walbro 255 fuel pump will quickly be installed even tho the FPSS is intact.
And probably immediately thereafter a TKO tranny to replace the mayham of whats left of the T-45 on 550 RWHP and 600ft/lbs. lol

Aside from the mean exhaust note, kinda sleeperish huh?

[IMG]local://upfiles/10124/B847FDA7E093494786BB1F57AA94354E.jpg[/IMG]

[IMG]local://upfiles/10124/F85839E4AC214FDAA5A8DD2FA49B8CE9.jpg[/IMG]

JonBeast

Getting myself a nice PI 4.6 to drop in

Also an 8000k or 10000k HID kit.

Possibly color matching my side mirrors.

Possibly front/rear black leather seats to finish my interior conversion from tan to black.

StickShifty

getting myself the eibach prokit springs

code3GT

Why such a low compression rate for nitrous. 10.5 cc dish pistons are more of a S/C set up, aren't they?

ZW99GT

final C/R on the kit is listed at 10.8-1.

P.S. Code, im not really sure of what all you have on your bucket, but by all means, please inform me if you see anything major(safety or power wise is missing). I know suspension is lacking hardcore.

code3GT

If it was me, "I" would save the $$ from the MAF, you aren't gonna gain anything over your stock one. My pistons have a 5cc dish and I am 11.25:1 compression. Where are ya getting the kit from?