4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

can i hang with a 03-04 cobra

Thread Tools
 
Search this Thread
 
Old 09-14-2004, 11:14 AM
  #21  
rtm
2nd Gear Member
 
rtm's Avatar
 
Join Date: May 2004
Location:
Posts: 385
Default RE: can i hang with a 03-04 cobra

ORIGINAL: mtchll50

i may be young but i do know that if his cobra is pushin 16 PSI and 471 horsepower with a DOHC motor and i am pushin 10 PSi and maybe 400 horsepower on a SOHC motor.. i dont have to race to know i would get beat
I wouldn't go so far as to say that. A lot of factors can determine the outcome. I believe that I am a pretty good driver(never proved on a track though), but you could be a lot better driver than I am.

I think that you have a nice set-up, and could definately suprise some Cobras. Get some gears and I bet that car would be a blast.


Todd
rtm is offline  
Old 09-14-2004, 11:32 AM
  #22  
mdvaldosta
I ♥ Acer
 
mdvaldosta's Avatar
 
Join Date: Sep 2003
Location: United States
Posts: 8,826
Default RE: can i hang with a 03-04 cobra

Thats so true rtm. I saw a3 or 04 Cobra at the track a few weeks ago - word was the guy had a pulley upgrade, chip & exhaust. I saw him run a 13.2, 12.6, 13.0, & 12.9

As you can see he most likely had in the neighborhood of 450+ rwhp - and a BIG torque curve. Little ole me ran a couple 12.4's and a bunch of 12.'s and 12.6's ran out of gear every run. So the guy had probably 50+ rwhp peak and probably averaged 100 rwhp over me across the curve. Dude just couldn't drive it.

When your driving 14 or 15 second cars the 1/4 mile difference between different drivers may only be .1 seconds... but on a 12 second car it may be 1 second. Suspension and tires play a large roll as well.
mdvaldosta is offline  
Old 09-14-2004, 03:13 PM
  #23  
chriscindy6369
3rd Gear Member
 
chriscindy6369's Avatar
 
Join Date: Apr 2004
Location: Schenectady NY
Posts: 506
Default RE: can i hang with a 03-04 cobra

The main thing to going fast and quick is getting the power to the ground. All of it!!

[IMG]local://upfiles/6214/76B9DE076C38453EB71A84ED035F3B4F.jpg[/IMG]
chriscindy6369 is offline  
Old 09-14-2004, 03:15 PM
  #24  
rtm
2nd Gear Member
 
rtm's Avatar
 
Join Date: May 2004
Location:
Posts: 385
Default RE: can i hang with a 03-04 cobra

My thoughts exactly!

That's a nice time you have there.




Todd
rtm is offline  
Old 09-14-2004, 05:14 PM
  #25  
Race1Mopar
1st Gear Member
 
Race1Mopar's Avatar
 
Join Date: Mar 2004
Posts: 52
Default RE: can i hang with a 03-04 cobra

mdvaldosta,
I think you bring up a very good point. You said you ran out of gear??? So at the point of all your mods plus the sc it would be more benificial for you to have 3.73's IF you had enough power to pass 112MPH in the 1/4. Looking at the calculator and assuming 6000rpm, 3.73's, 1.0 transmision ratio (4th gear right) and a tire diameter of 25.68 you could then go as fast as 123mph before you ran out of gear.

That's so cool, but I bet frustrating.

Joe
Race1Mopar is offline  
Old 09-14-2004, 11:21 PM
  #26  
RJM02GTDrag
2nd Gear Member
 
RJM02GTDrag's Avatar
 
Join Date: Jan 2004
Location: United States
Posts: 478
Default RE: can i hang with a 03-04 cobra

With stock gears you cant hang with the Cobra, better get 3:73's and way deep into the 12s to win. I race an 03 Cobra with only a pulley upgrade and cat back that runs 11.98.
RJM02GTDrag is offline  
Old 09-14-2004, 11:35 PM
  #27  
04ShakinSteed
I ♥ Acer
 
04ShakinSteed's Avatar
 
Join Date: Jan 2004
Location: Reading, Pa.
Posts: 2,617
Default RE: can i hang with a 03-04 cobra

ORIGINAL: RJM02GTDrag

With stock gears you cant hang with the Cobra, better get 3:73's and way deep into the 12s to win. I race an 03 Cobra with only a pulley upgrade and cat back that runs 11.98.
That's not yours is it RJM?? That is the car your racing against, right?
04ShakinSteed is offline  
Old 09-14-2004, 11:52 PM
  #28  
RJM02GTDrag
2nd Gear Member
 
RJM02GTDrag's Avatar
 
Join Date: Jan 2004
Location: United States
Posts: 478
Default RE: can i hang with a 03-04 cobra

ORIGINAL: 04ShakinSteed

ORIGINAL: RJM02GTDrag

With stock gears you cant hang with the Cobra, better get 3:73's and way deep into the 12s to win. I race an 03 Cobra with only a pulley upgrade and cat back that runs 11.98.
That's not yours is it RJM?? That is the car your racing against, right?
No, I only wish it was mine, but if it was I would get the cats off, long tubes and drag radials on so fast it would be funny. I still race the yellow vert in the sig but my son is going to take that over I am looking for a Cobra or a Mach, definately a 4v motor.
RJM02GTDrag is offline  
Old 09-15-2004, 03:03 AM
  #29  
jdaniel
I ♥ Acer
 
jdaniel's Avatar
 
Join Date: Apr 2004
Location:
Posts: 9,172
Default RE: can i hang with a 03-04 cobra

ORIGINAL: Bob99GTConv

Guys! The stock Cobras runs the quarter in the mid to high 13's depending on the driver. If your in the 12's which he would be with the right tires, it's no contest. Cobra's (03-04) have 320 horses.

Damn newbie! I have see a '03 cobra run 12.1 with a pully change and drag slicks. LOL And where in the hell did you get 320 hp? LMAO!!!
jdaniel is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Stone629
The Racers Bench
66
06-02-2016 09:52 PM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
3
11-10-2015 11:39 AM
88 orangepeel notch
Street/Strip
4
10-05-2015 09:03 AM
BeatnikFink
New Member Area
6
10-01-2015 08:00 PM
tj@steeda
Florida Regional Chapter
0
09-30-2015 08:04 PM



Quick Reply: can i hang with a 03-04 cobra



All times are GMT -5. The time now is 12:33 AM.