golferjoe11

For anyone who knows: Whatdo say... stage 2 cams do to gas millage?

RiCe_KiLlEr

i dont know how stage 2 cams are on gas mileage. but i have full boltons, stage 1 cams and 4.10 gears and i get 15.5-16.0 mpg

JT76

2000GT, how much RWHP did u have N/A? that vid was nasty

96_LAstang

can someone give an idea how much stage 1 cams and install would be?

96_LAstang

what the stock valve lift on a 2000 GT

MBentz

It's expensive, you may as well do heads at the same time.

96_LAstang

Well i have been interested in Kenne Bell SC, but lately i've been thinking about going N/A. Keeping the stock bottom in, until i can do a stroker motor.

if i do the heads i would go head for stage 2 cams, how would that do for the bottom end?

RiCe_KiLlEr

for the cam install and to just put it on the dyno and see if it was running lean/ rich, it cost me 800 bucks

1BAD3V

So that's like $5-600 for cams itself, than another $800 or so for install and to check it on dyno to see how it runs? Did they tune it for you for $800, or did you have to pay more to get it tuned? That is kinda ridiculous.

DTK

Do you need the VT cam gear kit for the Stage 1 install on an 04 gt?
I saw it on the vt site, it is for stock cams that have the gears pressed on.

Is that the case for an 04?