Stroked Stang heading to dyno!!!!!!!!
12-27-2006, 01:37 AM
#16
6th Gear Member
Thread Starter
Join Date: Nov 2004
Location: Tennessee
Posts: 7,797
RE: Stroked Stang heading to dyno!!!!!!!!
Well damn Stang2000, you are the winner!!!!!!!! Sorry about the wait. I have to work early, so I dont have time to load the sheet of Vid. SORRY
Well after a 2hr drive, she was good and heat soaked, and we threw he straight on the dyno. I unloaded my Diablo tune, and programmed everything for the new SCT. He went through a couple perameters on his computer, and we were off.
1st pull, I was SOOOnervous, here she goes 2000rpm, 2250rpm, 2500rpm, WOAHHH he says. A/F us 10.2 WTF????? 10.2? Thats freaking rediculous. Thats over 20% too much fuel. He was like holy ****.
2nd pull, he said it was still gonna be a little rich, so I didnt expect much. Here we go, up throught the RPMS like a speeding bullet, FREAKING SCREAMIN at 5000, It made my head hurt(this was inside a shop, and I was like 5ft away from the muffler)lol. 319rwhp/332rwtq Wow I thought, thats sick, and I still gotsome to go.
3rd pull, he said this one would be dead on and it was. She was a tad bit lean from 3.5k to 4k, but besides that, shes ridin the 13.0 line. 320.22rwhp/334.18rwtq.
Today was GREAT day to dyno. heres the parameters of the run.
63.28 degrees F
humidity 31%
So, with her having bbk shorties, and being hot, I am VERY PLEASED. I could EASILY get to 330rwhp with LT's(which I will do soon). code3GT has still got me hammered by over 25rwhp, but she gave it her all, and Im proud of her. Time to get my NX kit together and SPRAY THIS BITCH!
P.S. I dont think the stroker kit was a damn bit of help. Even without the extra cubes, I could see a car with similar mods to mine making the same power. Maybe they are overrated like code says.
Well after a 2hr drive, she was good and heat soaked, and we threw he straight on the dyno. I unloaded my Diablo tune, and programmed everything for the new SCT. He went through a couple perameters on his computer, and we were off.
1st pull, I was SOOOnervous, here she goes 2000rpm, 2250rpm, 2500rpm, WOAHHH he says. A/F us 10.2 WTF????? 10.2? Thats freaking rediculous. Thats over 20% too much fuel. He was like holy ****.
2nd pull, he said it was still gonna be a little rich, so I didnt expect much. Here we go, up throught the RPMS like a speeding bullet, FREAKING SCREAMIN at 5000, It made my head hurt(this was inside a shop, and I was like 5ft away from the muffler)lol. 319rwhp/332rwtq Wow I thought, thats sick, and I still gotsome to go.
3rd pull, he said this one would be dead on and it was. She was a tad bit lean from 3.5k to 4k, but besides that, shes ridin the 13.0 line. 320.22rwhp/334.18rwtq.
Today was GREAT day to dyno. heres the parameters of the run.
63.28 degrees F
humidity 31%
So, with her having bbk shorties, and being hot, I am VERY PLEASED. I could EASILY get to 330rwhp with LT's(which I will do soon). code3GT has still got me hammered by over 25rwhp, but she gave it her all, and Im proud of her. Time to get my NX kit together and SPRAY THIS BITCH!
P.S. I dont think the stroker kit was a damn bit of help. Even without the extra cubes, I could see a car with similar mods to mine making the same power. Maybe they are overrated like code says.
12-27-2006, 01:40 AM
#17
Super Moderator
Join Date: Jul 2003
Location:
Posts: 14,917
RE: Stroked Stang heading to dyno!!!!!!!!
Very nice. Like you said, it's not so much the Cubes holding back the 4.6, it's the heads, ported or not.
Good numbers NA, now you can safely hammer the car and not have to worry about the A/F!
Good numbers NA, now you can safely hammer the car and not have to worry about the A/F!
