4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

HELP!!

Thread Tools
 
Search this Thread
 
Old 01-26-2007, 08:25 PM
  #1  
stangfan97gt
Thread Starter
 
stangfan97gt's Avatar
 
Join Date: Jan 2007
Location:
Posts: 7
Default HELP!!

I have a 1997 Mustang GT and i am having problems when i am driving at low RPM's or when i hold it at about 2,000 RPM when i am sitting still it starts to bog and i have a hard time reving after that.I have to rev it up real high to clear it out.I have replaced Plugs, Wires, Coils, Fuel Filter, and Air Filter. but when i am reving it andi unplug that Mass Air Flow sensor it clears up and runs great. any help would be appreciated Thanks..
stangfan97gt is offline  
Old 01-26-2007, 08:46 PM
  #2  
redass02gt
EXTREME Moderation
 
redass02gt's Avatar
 
Join Date: Apr 2005
Location: BLAM-O
Posts: 7,895
Default RE: HELP!!

so you think the mass air sensor is fubar? go get some electrical cleaner like this and spray the wires.

make sure it's fast drying stuff that leaves no residue. I think I found something at autozone.
redass02gt is offline  




All times are GMT -5. The time now is 03:55 PM.