When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
so my mechanic is putting in my 4.10's for me tonight.. should be done around ten or so. just thought i would share the good news. im so happy, the only bad thing is having to break it in.
Instructions usually tell ya,,that came with the gears,,but most need a couple or 3 ,of heat cycles (20 to 30minute rides ) and a cool down of at least 30 minutes(inbetween)......Alot of people stated "be easy on them for at least 500 miles..." ..I've installed more gear sets them I can remember and have had no problems if you heat cycle them right.... and then run the **** out of them afterwards.then again,,I have a pinion depth guage setup and back lash tool also. and set them up right...no guessing..