Throttle body Question - MustangForums.com


4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Reply
 
 
 
Thread Tools Search this Thread
Old 01-28-2007, 11:09 PM   #1  
svtblu
1st Gear Member
Thread Starter
 
Join Date: Jan 2007
Location:
Posts: 87
Default Throttle body Question

I post on this website a lot becuz i have a lot of questions and a lot enthusiasm to get to know my car and options... but i was wandering with my current mods- 4:10 gears, short shifter, stage II clutch, bbk long tubes, o/r h pipe, flow 40's, K&N intake. wut throttle body i should run and which MAF should i run to make the most power with my current mods.
svtblu is offline   Reply With Quote
Old 01-28-2007, 11:12 PM   #2  
02 GT
4th Gear Member
 
02 GT's Avatar
 
Join Date: Jan 2007
Location: a parallel universe
Posts: 1,344
Default RE: Throttle body Question

i think you should run a 35mm throttlebody
02 GT is offline   Reply With Quote
Old 01-28-2007, 11:17 PM   #3  
Mark99GT
4th Gear Member
 
Join Date: Feb 2004
Location:
Posts: 1,895
Default RE: Throttle body Question

Quote:
ORIGINAL: 02 GT

i think you should run a 35mm throttlebody
WTF?

If you want to run a larger throttle body, you should go ahead and get a new intake plenum too. Go with a 75mm. Accufab is "the best" but also the most expensive. So go with what your budget allows. There are other brands that start around 200 for the combo. Or search the boards/ebay for a used setup.

Skip the MAF, your stock one is fine.
Mark99GT is offline   Reply With Quote
Old 01-28-2007, 11:24 PM   #4  
rdmypny
2nd Gear Member
 
rdmypny's Avatar
 
Join Date: Dec 2006
Location: Alabama
Posts: 326
Default RE: Throttle body Question

go to www.modularmustangracing.com and they have accufab 75mm T/B and plenum combo ploshed finish for less than $500 free shipping check it out
rdmypny is offline   Reply With Quote
Old 01-28-2007, 11:24 PM   #5  
svtblu
1st Gear Member
Thread Starter
 
Join Date: Jan 2007
Location:
Posts: 87
Default RE: Throttle body Question

now when you say if i buy a new throttle body i minds well buy a plenum too? what is the plenum? is that just the throttle body or what?
svtblu is offline   Reply With Quote
Old 01-28-2007, 11:30 PM   #6  
Mark99GT
4th Gear Member
 
Join Date: Feb 2004
Location:
Posts: 1,895
Default RE: Throttle body Question

Unless you've got all kinds of money burning a hole in your pocket skip the 400 dollar accufab unless you absolutely have to have it. You can get a professional products combo for around 200 bucks, or a bbk/C&L for around 300. They all work the same. Check ebay and the boards for used ones.

The plenum is what the throttle body bolts to, sometimes called the "upper intake." When you pop the hoodlook forthe part thathas the pony logo on it (right on top) thats attached to the throttle body and also attached to the intake manifold. Thats the plenum.
Mark99GT is offline   Reply With Quote
Old 01-28-2007, 11:31 PM   #7  
contentsunderpressur
5th Gear Member
 
Join Date: Nov 2006
Location: Bay Minette Alabama
Posts: 3,080
Default RE: Throttle body Question

Quote:
ORIGINAL: 02 GT

i think you should run a 35mm throttlebody
Please tell me you were kidding!!!
contentsunderpressur is offline   Reply With Quote
Old 01-28-2007, 11:33 PM   #8  
svtblu
1st Gear Member
Thread Starter
 
Join Date: Jan 2007
Location:
Posts: 87
Default RE: Throttle body Question

ok...so when u say i minds well get a new plenum too did u mean something like SHM's ported intake manifold that costs 600 plus the cost of the throttle body? or wut? thanks by the way.
svtblu is offline   Reply With Quote
Old 01-28-2007, 11:38 PM   #9  
Mark99GT
4th Gear Member
 
Join Date: Feb 2004
Location:
Posts: 1,895
Default RE: Throttle body Question

http://cgi.ebay.com/ebaymotors/MUSTA...spagenameZWDVW

Click on that. Its both the throttle body and plenum. Go back and search ebay for "mustang intake plenum" youll geta whole list of plenums and throttle bodies and look them over.

Im not sure what the SHM ported intake is you're talking about. But the link abovewill show you what you're looking for.
Mark99GT is offline   Reply With Quote
Old 01-28-2007, 11:40 PM   #10  
Mark99GT
4th Gear Member
 
Join Date: Feb 2004
Location:
Posts: 1,895
Default RE: Throttle body Question

Hey, I just noticed your name is svtblue. Are you rollin in a cobra? The throttle body for a cobra is different than for a GT. Ive been talking about parts for a GT. Theres a big difference, let us know what you're driving.
Mark99GT is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
How to get good HP out of a 4.6 without spending big bucks. Luke9222 4.6L General Discussion 19 10-22-2015 11:55 PM
No power from my 3.8 94stangnewbe V6 General Discussion 0 09-07-2015 07:39 PM
2007 mustang gt vs 2012 mustang v6 Webster454 2005-2014 Mustangs 1 09-07-2015 04:59 AM
Shifting Mustangmalo General Tech 2 09-06-2015 05:22 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Advertising
Featured Sponsors
Vendor Directory

All times are GMT -5. The time now is 03:47 AM.


© 2018 MH Sub I, LLC dba Internet Brands
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.