Fuel

hey guys i know all u want to read is another thread about pi stuff, but here it goes

APART FROM THE MILES ON MY CAR can i do just the cams and intake pi swap on a nonpi motor and get any kind of horsepower gains without doing the heads since i don't want the higher compression to do fi someday

again try to forget about the miles cause i will be taking care of that soon

RipTide7

yea you can, im going to be doing the same this spring but i think i might just upgrade to crower cams

RipTide7

the intake alone is good for almost 20 hp ive heard. and the dcams for another 15-20. This is just what ive read, dont crucify me, (or my horrible spelling.)

Fuel

somebody's gotta have some input[sm=feedback.gif]

aMerICAn_mUsCLe79

Yes you can just do cams and intake. If i where you i would upgrade the cams like Vt stage 1 or somthing. You still will have good gains esp with aftermarket cams...

Fuel

what kind of power gains will i see with these swaps

aMerICAn_mUsCLe79

well with the heads its any where from 45-65 (higher is due to aftermarket cams) so i would guess the most you will c is 30-35ish atthe most? im not too sure how much heads add. though

RipTide7

i heard the heads are just about 10-15 due to the higher compression, and slightly reworked exhaust porting

aMerICAn_mUsCLe79

well i have stock cams coming to me from an 04 (low miles) and since i bought aftermarket im lookin to sell....so if u just want stock pi cams hit me up....i MAY be selling the heads....havsnt decided if im doin aftermarket or not

Fuel

help me out here guys what if i did vt stage 1 cams and a pi intake, the intake only there until i did some type of a p/d blower